Allen-Bradley E300 User Manual

Rockwell Automation Publication 193-UM015E-EN-P - October 2015 595
EtherNet/IP Communication Chapter 10
4. Enter a name and the IP address for the E300 relay EtherNet/IP
Communication Module. The name creates tags in RSLogix 5000 or
Studio 5000 that can be used to read and write data from the E300 relay
EtherNet/IP Communication Module.
5. Select Change to select the modules and accessories of the E300 relay
system.
6. Select the specific E300 relay Sensing and Control Modules and their
respective Option Match actions.
7. Right click on the Expansion Bus to add the specific Expansion Bus
accessories for the E300 relay system and select their specific Option
Match action. When finished, press OK.

Allen-Bradley E300 Specifications

General

Type	Electronic Overload Relay
Mounting	DIN Rail or Panel Mount
Protection Class	IP20
Voltage Range	24…690 V AC/DC
Communication Options	EtherNet/IP, DeviceNet
Protection	Overload, phase loss, ground fault
Operating Temperature	-20°C to 60°C