MT8852B Specification
A-6 PN: 13000-00205 Rev. N MT8852B Operation Manual
Measurement
configuration
Hopping: Off and On – measure at Defined, All, or Any frequencies
Modulations: /4DQPSK and 8DPSK
Packet type: 2-DH1, 3, 5 and 3-DH1, 3, 5
Loopback or Tx mode
EUT power level: Max and Min
Displayed results Initial frequency error i
Frequency error o
Frequency error i + o
RMS DEVM (block with greatest DEVM value displayed)
Peak DEVM
99% DEVM
Average RMS DEVM (average DEVM for all blocks measured)
Number of measurement
frequencies
Three, default to RF Test Specification or user defined
Carrier frequency stability
measurement range
0 Hz to ±100 kHz
Carrier frequency stability
accuracy
500 Hz ± Frequency Standard
Carrier frequency stability
resolution
1 kHz
RMS DEVM range 30% /4DQPSK, 20% 8DPSK
RMS DEVM resolution 0.1% /4DQPSK and 8DPSK
Peak DEVM range 0 to 50% /4DQPSK, 0 to 30% 8DPSK
Peak DEVM resolution 0.1% /4DQPSK and 8DPSK
EDR Differential Phase
Encoding
TRM/CA/BV-12-C
Measurement
configuration
Hopping mode: OFF and ON, user selectable
Modulations: /4DQPSK and 8DPSK
Packet type: 2-DH1, 3, 5 and 3-DH1, 3, 5.
Number of test packets: default 100
Tx mode only
Displayed results Number of packets received
Number of packets with payload data errors
Percentage of errored packets
Number of measurement
frequencies
Three, default to RF Test Specification or user defined
EDR Sensitivity RCV/CA/BV-07-C
To Next Page
Loading...
