14. Lenses and Lens Holder
14.5 Lens removal
How to remove
1. S upport the lens with one hand while you unlock the lens holder by sliding the lock handle towards the “unlocked” position as
illustrated.
Image 14-20
Lens removal, unlock
2. Gently pull the lens out of the lens holder.
Image 14-21
Lens removal
It’s recommended to place the Lens caps of the original Lens packaging, back on both sides of the removed
Lens to protect the optics of the Lens.
It’s recommended to place the foam rubber of the original projector packaging, back into the Lens opening to
prevent intrusion of dust. Note that this foam rubber is packed in a plastic bag to prevent the dust, emitted by
the foam, from entering the projector.
222 R5905312 HDF W SERIES 24/01/2013
To Next Page
Loading...
