16. Heat exchanger
16.3 Assembling the new heat exchanger
How to assemble
1. P lace the fan assembly on the heat exchanger and secure by fastening the four nuts (2 on ea ch side).
A
B
Image 16-9
Assembling heat exchanger
2. P lace the heat exchanger and fan as semb ly on the dust filter assem bly and secure by fastening the four n uts (2 on each side).
3. P ush the tube + valved fitting (1) through the hole in the plate on the input of the heat exchanger.
2
1
4
3
Image 16-10
4. S ecure with a clip (2). Push both clip tongs together and slide the clip on the hose. Release the tongs and it clamps automatically.
5. P ush the tube coming from the flow sw itch on the o utput of the heat exchanger (3).
R5905312 HDF W SERIES 24/01/2013
273
To Next Page
Loading...
