Barco HDF W series - Page 98

5. Troubleshooting
Code 100033: “Lim read failed” (Warning)
Situation Solution
Internal projector so ftware error. First s olve error/warning messages with ID number below 100000 . If problem rem ains,
contact Barco.
Code 100034: “Lsm read failed” (Error)
Situation Solution
Internal projector so ftware error. First s olve error/warning messages with ID number below 100000 . If problem rem ains,
contact Barco.
Code 100035: “Fcb reply no ack” (Error)
Situation Solution
Internal projector so ftware error. First s olve error/warning messages with ID number below 100000 . If problem rem ains,
contact Barco.
Code 100036: “Mcb reply no ack” (Error)
Situation Solution
Internal projector so ftware error. First s olve error/warning messages with ID number below 100000 . If problem rem ains,
contact Barco.
Code 100037: “Lps reply no ack” (Error)
Situation Solution
Internal projector so ftware error. First s olve error/warning messages with ID number below 100000 . If problem rem ains,
contact Barco.
Code 100038: “Fib reply no ack” (Error)
Situation Solution
Internal projector so ftware error. First s olve error/warning messages with ID number below 100000 . If problem rem ains,
contact Barco.
Code 100039: “Lim reply no ack” (Error)
Situation Solution
Internal projector so ftware error. First s olve error/warning messages with ID number below 100000 . If problem rem ains,
contact Barco.
Code 100040: “Lsm reply no ack” (Error)
Situation Solution
Internal projector so ftware error. First s olve error/warning messages with ID number below 100000 . If problem rem ains,
contact Barco.
Code 100041: “Init 5-cable firmware failed, input 1” (Error)
Situation Solution
Internal projector so ftware error. First s olve error/warning messages with ID number below 100000 . If problem rem ains,
contact Barco.
Code 100042: “Init 5-cable firmware failed, input 2” (Error)
Situation Solution
Internal projector so ftware error. First s olve error/warning messages with ID number below 100000 . If problem rem ains,
contact Barco.
Code 100043: “Init 5-cable firmware failed, input 3” (Error)
Situation Solution
Internal projector so ftware error. First s olve error/warning messages with ID number belo
w 100000 . If problem remains,
contact Barco.
94 R5905312 HDF W SERIES 24/01/2013