Branson 2000X - Saving a Preset

2000X energy Power Supply Chapter 6: Operation
Instruction Manual Saving and Recalling Presets
011-003-991 EN 6-59
Saving a Preset
After you have set up the Power Supply to run a weld in a particular way, you can choose
to save that combination of settings as a Preset. You will be able to name the Preset to
make it easy to recall at a later time.
Take this action… To get this result…
Press the Main Menu key.
Press the Select key that corresponds to
Save/Recall Presets.
MAIN MENU Pg1of6
Run Screen
Weld Setup
Save/Recall Presets
Main
Menu
MAIN MENU Pg1of6
Run Screen
Weld Setup
Save/Recall Presets
Select
Select
Select