Chapter 6: Operation
Setting Primary Parameters
6-18 011-003-991 EN
6.4.2 Using Energy Weld Mode
You can use Energy Mode to select the amount of ultrasonic energy that is applied to your parts. Within
Energy Mode, you can also select several other parameters, ranging from Hold Time (in seconds) to Sus-
pect and Reject Limits. The following two pages contain a map of the menu options in Energy Mode. Pro-
cedures for setting primary parameters follow the map. For more information on setting the optional
parameters within Energy Mode, or any other welding mode, see Section 6.4: Setting Other Weld Parame-
ters, on page 6-30.
To Next Page
Loading...
