Branson 2000X - Setting the System Time

Chapter 6: Operation
Using the System Configuration Menu
6-106 011-003-991 EN
Setting the System Time
Take this action… To get this result…
Press the Select key that corresponds to
Time.
Press the Select key that corresponds to
Hours or Minutes, and use the numeric key-
pad to set the time, on a 24-hour clock.
Press the Go Back/Esc key when you
have finished setting the time.
SYS CONFIG Pg6of13
RS232> Terminal
Gen Alarm Reset =Off
Time> 18:43
Select
Select
Select
TIME Pg1of1
Hours =18
Minutes =43
Select
Select
Select