2000X energy Power Supply Chapter 6: Operation
Instruction Manual Using the System Configuration Menu
011-003-991 EN 6-105
Turning the General Alarm Reset On or Off
Take this action… To get this result…
Press the Select key that corresponds to
Gen Alarm Reset.
Press the Select key repeatedly to toggle
between Off and On. Press the Enter key
on the numeric keypad when you have set
General Alarm Reset to the function you
want.
SYS CONFIG Pg5of13
Preset Counter>
RS232> Terminal
Gen Alarm Reset =Off
SYS CONFIG Pg5of13
Preset Counter>
RS232> Terminal
Gen Alarm Reset =On
To Next Page
Loading...
