2000X energy Power Supply Chapter 3: Delivery and Handling
Instruction Manual Unpacking
011-003-991 EN 3-3
To inspect the Power Supply when it is delivered, take the following steps:
3.3 Unpacking
The Power Supply is fully assembled. It is shipped in a sturdy cardboard box. Some additional items are
shipped in the box with the Power Supply.
Step: Action:
1 Verify that all parts are complete according to the packing slip.
2 Check the packing and the unit for damage (visual inspection).
3 Report any damage claims to your carrier immediately.
4
Determine if any component has become loose during shipping and, if
necessary, tighten screws.
If the goods delivered have been damaged during shipping,
please contact the forwarding agent immediately. Retain
packing material (for possible inspection or for sending back
the unit).
.
The Actuator and the Power Supply are heavy. Handling,
unpacking, and installation may require the assistance of a
colleague or the use of lifting platforms or hoists
To Next Page
Loading...
