Branson 2000X - Delivery and Handling; Shipping and Handling; Environmental Specifications

2000X energy Power Supply Chapter 3: Delivery and Handling
Instruction Manual Shipping and Handling
011-003-991 EN 3-1
Chapter 3: Delivery and Handling
3.1 Shipping and Handling - - - - - - - - - - - - - - - - - - - -3 - 1
3.1.1 Environmental Specifications - - - - - - - - - - - - - - - - -3 - 1
3.2 Receiving - - - - - - - - - - - - - - - - - - - - - - - - - - -3 - 2
3.3 Unpacking- - - - - - - - - - - - - - - - - - - - - - - - - - -3 - 3
3.4 Returning Equipment - - - - - - - - - - - - - - - - - - - - -3 - 4
3.1 Shipping and Handling
CAUTION
The Power Supply internal components are sensitive to static discharge. Many components
can be harmed if the unit is dropped, shipped under improper conditions or otherwise mis-
handled.
3.1.1 Environmental Specifications
The Power Supply is an electronic unit that converts line voltage to ultrasonic energy and controls user input
for regulating the weld process. Its internal components are sensitive to static discharge, and many of its
components can be harmed if the unit is dropped, shipped under improper conditions, or otherwise mishan-
dled.
The following environmental guidelines should be respected in the shipping of the Power Supply.
Table 3.1 Environmental Specifications
Environment Range
Ambient Operating Temperature +41°F to +122°F (+5°C to +50°C)
Storage / Shipping Temperature –13°F to +158°F (–25°C to +70°C)