2000X energy Power Supply Chapter 6: Operation
Instruction Manual Saving and Recalling Presets
011-003-991 EN 6-57
6.5 Saving and Recalling Presets
You can set up the 2000X Power Supply to weld a particular application and then save the settings to a pre-
set. You can do this for up to twelve presets.
If, for instance, you have verified through trial and error or some other means that a particular combination
of Power Supply settings yields acceptable parts for each of several different configurations or materials,
you might want to save that combination of settings as a preset to streamline the change from production
of one part to another. Always set the Power Supply to the combination of parameter settings that you want
to save before entering the Presets menu. The following two pages contain a map of the menu items avail-
able on the Presets menu.
To Next Page
Loading...
