Branson 2000X - Setting the System Date

2000X energy Power Supply Chapter 6: Operation
Instruction Manual Using the System Configuration Menu
011-003-991 EN 6-107
Setting the System Date
Take this action… To get this result…
Press the Select key that corresponds to
Date.
Press the Select key that corresponds to
Month, Day, or Year, and use the numeric
keypad to set the date. Press the Go Back/
Esc key when you have finished setting the
date.
SYS CONFIG Pg7of13
Gen Alarm Reset =No
Time> 18:43
Date> 10/25/00
Select
Select
Select
DATE Pg1of1
Month =10
Day =25
Year =98
Select
Select
Select