Branson 2000X - Page 155

2000X energy Power Supply Chapter 6: Operation
Instruction Manual Saving and Recalling Presets
011-003-991 EN 6-63
Press the Select key that corresponds to
the preset that you want to use.
The Power Supply will recall all of the
parameters you have set to correspond to
that preset and return you to the Run
Screen. Here you can verify that the cor-
rect preset has been recalled Press the
select key that corresponds to the alarm
message.
RECALL Pg1of8
01 TM=30.000s
02 E=15000J
03 PP=85%
Select
Select
Select
READY: TM = 30.000s
**ALARM**
Adjust Weld>
Weld Results>
Select
Select
Select