Cisco ASR 9000 Series Command Reference

This table describes the significant fields shown in the display.
Table 4: show pool ipv4 name Field Descriptions
DescriptionField
Specifies the VRF the pool is associated with.VRF
The unique pool ID of a specific pool.Pool ID
Pool scope belongs to the VRF specific pool.Pool Scope
Length of the prefix specified.Prefix Length
Related Commands
DescriptionCommand
Enables distributed address pool service on vrf.pool vrf, on page 90
Enables distributed address pool service on ipv4.pool ipv4, on page 92
Specifies a range of IP addresses that distributed
address pool service should not assign to clients.
exclude, on page 82
Specifies a range of IP addresses.address-range, on page 80
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
101
Address Pool Service Commands
show pool ipv4 name

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model