Cisco ASR 9000 Series Command Reference

Multicast Commands
This module describes the Cisco IOS XR software commands used to configure the Multicast commands
for Broadband Network Gateway (BNG) on the Cisco ASR 9000 Series Router. For details regarding the
related configurations, refer to the Cisco ASR 9000 Series Aggregation Services Router Broadband Network
Gateway Configuration Guide.
•
router igmp vrf, page 334
•
igmp accounting, page 335
•
igmp explicit-tracking, page 336
•
igmp query-interval, page 338
•
igmp query-max-response-time, page 340
•
multicast (BNG), page 342
•
unicast-qos-adjust, page 344
•
show igmp unicast-qos-adjust statistics, page 346
•
show igmp vrf (BNG), page 349
•
clear igmp unicast-qos-adjust, page 351
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
333

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model