Name: Cisco ASR 9000 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

router igmp vrf

To configure route-policy to be used to map the bandwidth profile, use the router igmp vrf command in the

Global Configuration mode. To disable this feature, use the no form of this command.

router igmp vrf vrf_name {traffic| profile| profile_name}

no router igmp vrf vrf_name {traffic| profile| profile_name}

Syntax Description

Specifies the VRF name.

vrf_name

Configures IGMP traffic variables.traffic

Configures route-policy to be used to map the

bandwidth profile.

profile

Specifies the profile name.

profile_name

Command Default

None

Command Modes

Global Configuration mode

Command History

ModificationRelease

This command was introduced.Release 4.2.0

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task

IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator

for assistance.

Task ID

OperationTask ID

read, writemulticast

Examples

This is an example of configuring the router igmp vrf command in the Global Configuration mode:

RP/0/RSP0/CPU0:router # configure

RP/0/RSP0/CPU0:router(config)# router igmp vrf vrf1

RP/0/RSP0/CPU0:router(config)# router igmp vrf vrf1 traffic profile prof-name

Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,

Release 5.2.x

334

Multicast Commands

router igmp vrf

Cisco ASR 9000 Series Command Reference

Other manuals for Cisco ASR 9000 Series