Cisco ASR 9000 Series Command Reference

activate
To activate the dynamic template mode in the class map sub-configuration mode, use the activate command
in the Global Configuration mode. To disable this feature, use the no form of this command.
activate dynamic-template {name aaa list {list_name| default}}
no activate
Syntax Description
Specifies the actions related to dynamic templates.dynamic-template
Specifies the name of the dynamic template.
name
Specifies the AAA parameters.aaa
Specifies the AAA method list that identifies the radius server from which to
acquire the service definition.
list
Specifies the default AAA method list.default
(Optional) Specifies the name of the AAA method list. If provided, the template
is downloaded from radius. If not provided, then the template is expected to be
locally configured.
list_name
Command Default
None
Command Modes
Global Configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
No specific guidelines impact the use of this command.
Task ID
OperationTask ID
read, writeqos
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
114
Control Policy Commands
activate

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model