Cisco ASR 9000 Series - Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference

To Next Page

To Previous Page

Task ID

OperationsTask ID

read, writeaaa

Examples

This example shows how to make RADIUS use the IP address of subinterface s2 for all outgoing RADIUS

packets:

RP/0/RSP0/CPU0:router# configure

RP/0/RSP0/CPU0:router(config)# radius source-interface loopback 10 vrf vrf1

Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,

Release 5.2.x

BNG AAA Commands

radius source-interface (BNG)

Other manuals for Cisco ASR 9000 Series