Cisco ASR 9000 Series Command Reference

Examples
This example shows how to enable SPAN on BNG subscriber interface by associating a dynamic template
with a specific subscriber :
RP/0/RSP0/CPU0:router# test radius coa activate acct-ses-id 0x00000001 service service1
This example shows how to disable SPAN on BNG subscriber interface by dis-associating a dynamic template
with a specific subscriber :
RP/0/RSP0/CPU0:router# test radius coa deactivate acct-ses-id 0x00000001 service service1
Related Commands
DescriptionCommand
Defines a traffic mirroring session and enters
monitor session configuration mode.
monitor-session
Associates a traffic mirroring session with a
specific interface or dynamic template.
monitor-session (interface-dynamic-template-BNG)
Displays status information about configured traffic
mirroring sessions.
show monitor-session status
Displays statistics regarding traffic mirroring
sessions.
show monitor-session counters
Clears the traffic mirroring session statistics.clear monitor-session counters
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
245
Dynamic Template Commands
test radius coa activate

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model