Cisco ASR 9000 Series Command Reference

Dynamic Template Commands
This module describes the Cisco IOS XR software commands used to configure the Dynamic Template
commands for Broadband Network Gateway (BNG) on the Cisco ASR 9000 Series Router. For details
regarding the related configurations, refer to the Cisco ASR 9000 Series Aggregation Services Router
Broadband Network Gateway Configuration Guide.
•
dynamic-template, page 232
•
dynamic-template type ipsubscriber, page 234
•
dynamic-template type ppp, page 236
•
dynamic-template type service, page 238
•
monitor-session (interface-dynamic-template-BNG), page 240
•
service-policy (BNG), page 242
•
test radius coa activate, page 244
•
timeout idle, page 246
•
vrf (dynamic-template-BNG), page 248
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
231

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model