Cisco ASR 9000 Series Command Reference

aaa server radius dynamic-author
To configure radius dynamic author server, use theaaa server radius dynamic-author command in Global
Configuration mode or Admin Configuration mode. To disable this subscriber authentication method, use the
no form of this command.
aaa server radius dynamic-author {client hostname | ignore {server-key | session-key}| port port_number
| server-key {0 | 7 | line_number}}
no aaa server radius dynamic-author
Syntax Description
Specifies that the session-key could be ignored.session-key
Represents the CoA client configuration.client
Specifies the hostname (IPv4 address or domainof the CoA client.
hostname
Specifies the ignore options.ignore
Specifies the CoA server port to listen on.port
Sets the shared secret to verify client CoA requests.server-key
Represents the port number and the value ranges from 1000 to 5000.
port_number
Specifies that the unencrypted key will follow.0
Specifies that the encrypted key will follow.7
Represents the unencrypted (cleartext) key.
line_number
Command Default
No default behavior or values
Command Modes
Global Configuration mode.
Command History
ModificationRelease
This command was introduced.Release 4.2.0
The support for the keywords, auth-key and ignore {session-key}
were removed.
Release 4.2.1
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
23
BNG AAA Commands
aaa server radius dynamic-author

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model