Cisco ASR 9000 Series Command Reference

Session count 1
This table describes the significant fields shown in the display.
Table 15: show ipsubscriber access-interface Field Descriptions
DescriptionField
Specifies the access interface type.Interface
Specifies the prototype, for instance, DHCP,
DHCPv6, PKTv6.
Proto
Specifies the DHCP initiation.DHCP
Specifies the packet trigger Initiation.Pkt Trigger
Specifies the packet trigger Initiation for IPv6.DHCPv6
Specifies the DHCPv6 initiation.PktTrigIPv6
Specifies the various states of the access interface,
for example, up, down, deleted, and unknown state.
State
Related Commands
DescriptionCommand
Displays the subscriber management session
information.
ipsubscriber l2-connected, on page 280
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
288
IPoE Commands
show ipsubscriber access-interface

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model