Cisco ASR 9000 Series Command Reference

service-policy type control subscriber
To associate a subscriber control service policy to the interface, use the service-policy type control subscriber
command in interface configuration mode. To disable the service-policy type control subscriber, use the no
form of this command.
service-policy type control subscriber name
no service-policy type control subscriber name
Syntax Description
Represents the policy map name.
name
Command Default
None
Command Modes
Interface configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writeconfig-services
Examples
This is an example of configuring the service-policy type control subscriber command in interface
configuration mode:
RP/0/RSP0/CPU0:router(config)# interface Bundle-Ether 344
RP/0/RSP0/CPU0:router(config-if)# service-policy type control subscriber sub1
Related Commands
DescriptionCommand
Enables the class-map.class-map type control subscriber, on page 120
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
133
Control Policy Commands
service-policy type control subscriber

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model