Cisco ASR 9000 Series Command Reference

show aaa trace
To display all trace data for AAA sub-system, use the show aaa trace command in the EXEC mode.
show aaa trace [basic| errors| file| func| hexdump| job| last| location| reverse| stats| tailf| unique| usec|
verbose| wide| wrapping]
Syntax Description
Displays the data for AAA basic events.basic
Displays the data for AAA client library errors.errors
Displays the specific file.file
Displays the data for AAA function.func
Displays the traces in hexadecimal.hexdump
Displays the job ID.job
Displays the last n entries.last
Displays the card location.location
Displays the latest traces first.reverse
Displays the statistics.stats
Displays the new traces as they were added.tailf
Displays the unique entries with counts.unique
Displays the internal debugging information.verbose
Displays the wrapping entries.wrapping
Displays the output modifiers.|
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
55
BNG AAA Commands
show aaa trace

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model