Cisco ASR 9000 Series Command Reference

show radius (BNG)
To display the tunnel-related information, use the show radius command in the EXEC mode.
show radius [accounting| authentication| dead-criteria| double-dip| location| server-groups]
Syntax Description
Displays the RADIUS accounting data.accounting
Displays the RADIUS authentication data.authentication
Displays the RADIUS dead-server detection criteria.dead-criteria
Displays the RADIUS double-dip data.double-dip
Specifies the RADIUS instance location.location
Displays the RADIUS server group information.server-groups
Displays the output modifiers.|
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator for assistance.
Task ID
OperationTask ID
readaaa
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
57
BNG AAA Commands
show radius (BNG)

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model