Cisco ASR 9000 Series Command Reference

aaa authorization subscriber
To create authorization-related configurations, use the aaa authorization subscriber command in Global
Configuration mode. To disable this subscriber authorization method, use the no form of this command.
aaa authorization subscriber {list_name| default} group {server_group_name | radius}
no aaa authorization subscriber {list_name| default} group {server_group_name| radius}
Syntax Description
Uses the listed authentication methods that follow this keyword as the
default list of methods for authentication.
default
Represents the character string for the list name for AAA authorization.
list-name
Specifies the server-group.group
Specifies the list of all RADIUS hosts.radius
Specifies the server group name.
server_group_name
Command Default
None
Command Modes
Global Configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
No specific guidelines impact the use of this command.
Task ID
OperationTask ID
read, writeaaa
Examples
This is an example of configuring the aaa authorization subscriber command in the Global Configuration
mode:
RP/0/RSP0/CPU0:router(config)# aaa authorization subscriber sub1 group sg1 group sg2
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
13
BNG AAA Commands
aaa authorization subscriber

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model