Cisco ASR 9000 Series Command Reference

ModificationRelease
Support for server profile was
added.
Release 5.1
Support for DHCP IPv6 relay was
added.
The keyword base was added as
part of DHCPv4 Service Based
Mode Selection feature.
Release 5.2.2
Usage Guidelines
The support for base profile option is available only for DHCP IPv4, and not for DHCP IPv6.
Task ID
OperationsTask ID
read, writeip-services
Examples
This is an example of attaching a base profile to an interface:
RP/0/RSP0/CPU0:router(config)# dhcp ipv4
RP/0/RSP0/CPU0:router(config-dhcpv4)# interface gigabitEthernet 0/0/0/0 base profile
BASE_PROFILE
This is an example of enabling the DHCP interface mode on a Packet over Sonet/SDH (POS) interface using
the interface command:
RP/0/RSP0/CPU0:router(config)# dhcp ipv6
RP/0/RSP0/CPU0:router(config-dhcpv6)# interface POS 0/5/0/0 relay
This is an example of enabling the DHCP interface mode on a Packet over Sonet/SDH (POS) interface using
the interface command:
RP/0/RSP0/CPU0:router(config)# dhcp ipv4
RP/0/RSP0/CPU0:router(config-dhcpv4)# interface POS 0/5/0/0 server profile TEST
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
163
BNG DHCP Commands
interface (DHCP-BNG)

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model