EasyManuals Logo

Cisco ASR 9000 Series Command Reference

Cisco ASR 9000 Series
590 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #238 background imageLoading...
Page #238 background image
encapsulation ambiguous dot1ad
To configure encapsulated ambiguous VLANs with IEEE 802.1ad Provider Bridging (PB) encapsulation type
on an access-interface, use the encapsulation ambiguous dot1ad command in the interface configuration
mode. To remove the encapsulated ambiguous VLANs, use the no form of this command.
encapsulation ambiguous dot1ad {any | vlan-id | vlan-range} [dot1q {any | vlan-range}]
no encapsulation ambiguous
Syntax Description
Specifies the matching criteria as any VLAN tag in the range 1 to 4094.any
VLAN-ID for the outer VLAN.
vlan-id
VLAN range for the outer and inner VLANs.
The range is given in comma-separated, or hyphen-separated format, or a
combination of both.
vlan-range
Indicates that the IEEE 802.1q standard encapsulation type is used for the inner
tag.
dot1q
Command Default
None
Command Modes
Interface configuration
Command History
ModificationRelease
This command was introduced.Release 4.2.0
The support for outer VLAN range was added in BNG.Release 5.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The valid combinations of ambiguous VLAN configurations in BNG, with IEEE 802.1ad Provider Bridging
(PB) encapsulation type are:
•
encapsulation ambiguous dot1ad {any | vlan-range }
•
encapsulation ambiguous dot1ad vlan-id dot1q { any | vlan-range }
•
encapsulation ambiguous dot1ad vlan-range dot1q any
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
224
BNG Interface Commands
encapsulation ambiguous dot1ad

Table of Contents

Other manuals for Cisco ASR 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9000 Series and is the answer not in the manual?

Cisco ASR 9000 Series Specifications

General IconGeneral
SeriesASR 9000
CategoryNetwork Router
Modular DesignYes
RedundancyYes (Hardware and Software)
Operating SystemCisco IOS XR
Interfaces/Ports10G, 40G, 100G, 400G Ethernet
Expansion SlotsVaries by model
Routing ProtocolBGP, OSPF, IS-IS, EIGRP
ManagementCLI, SNMP, NETCONF
Power SupplyRedundant
Port DensityVaries by model
Power Supply OptionsAC, DC
MemoryVaries by model
StorageVaries by model
DimensionsVaries by model
WeightVaries by model

Related product manuals