Cisco ASR 9000 Series Command Reference

show dhcp ipv6 proxy statistics
To display the statistics for Dynamic Host Configuration Protocol (DHCP) proxy, use the show dhcp ipv6
proxy statistics command in EXEC mode.
show dhcp ipv6 proxy statistics{debug| location| vrf}
Syntax Description
Displays the debug statistics for the proxy.debug
Displays the node location for the proxy.location
Displays the proxy statistics by VRF.vrf
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readip-services
Examples
This is a sample output from the show dhcp ipv6 proxy statistics command:
RP/0/RSP0/CPU0:router# show dhcp ipv6 proxy statistics
Wed Sep 5 01:10:35.650 UTC
VRF | RX | TX | DR
|
-------------------------------------------------------------------------------------------
default | 23 | 28 | 0
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
211
BNG DHCP Commands
show dhcp ipv6 proxy statistics

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model