Cisco ASR 9000 Series Command Reference

Adding adjacency: 0 0
Adjacency added: 0 0
Up: 0 0
Down: 0 0
Disconnecting: 0 0
Disconnected: 0 0
Unknown state: 0 0
Error: 0 0
---------- ------------
Total: 0 0
DHCPv6 PktTrig-IPv6
---------- ------------
Invalid: 0 0
Initialized: 0 0
Session creation started: 0 0
Control-policy executing: 0 0
Control-policy executed: 0 0
Session features applied: 0 0
VRF configured: 0 0
Adding adjacency: 0 0
Adjacency added: 0 0
Up: 0 0
Down: 0 0
Disconnecting: 0 0
Disconnected: 0 0
Unknown state: 0 0
Error: 0 0
---------- ------------
Total: 0 0
Routes Per VRF (0 VRFs):
Count
----------
Access Interface Counts (1 interfaces):
DHCP Pkt Trigger
---------- ------------
FSOL Packets: 0 0
FSOL Bytes: 0 0
DHCPv6 PktTrig-IPv6
---------- ------------
FSOL Packets: 0 0
FSOL Bytes: 0 0
This table describes the significant fields shown in the display.
Table 17: show ipsubscriber summary Field Descriptions
DescriptionField
Specifies the number of invalid packets for DHCP
and Packet Trigger.
Invalid
Specifies the number of packets that were initialized
for DHCP and Packet Trigger.
Initialized
Specifies the total number of session initiation that
was created.
Session creation started
Specifies the control policies that are executing for
DHCP and Packet Trigger.
Control-policy executing
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
294
IPoE Commands
show ipsubscriber summary

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model