Cisco ASR 9000 Series Command Reference

show ppp summary
To display the summary information for the PPP interfaces, use the show ppp summary command in EXEC
mode.
show ppp summary location location
Syntax Description
Displays the PPP summary for interfaces at a location.location
Specifies the location details.
location
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator for assistance.
Task ID
OperationTask ID
readppp
Examples
This example shows the output of the show ppp summary command for interfaces running PPP:
RP/0/RSP0/CPU0:router# show ppp summary location 0/5/CPU0
====================================
Interfaces running PPP
====================================
POS 0
Serial 200
PPPoE 10000
Multilink Bundles 100
----------------------------
Total 10300
====================================
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
408
BNG PPP Commands
show ppp summary

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model