Cisco ASR 9000 Series Command Reference

show vpdn
To display all vpdn-related information, use the show vpdn command in theEXEC mode.
show vpdn{client| config| history| tunnel destination| session}
Syntax Description
Displays VPDN client information.client
Dislays VPDN configuration information.config
Displays the vpdn session history information.history
Displays the vpdn tunnel destination information.tunnel destination
Displays the vpdn session information.session
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readipv4
readnetwork
Examples
These are some of the options to use the show vpdn command in the EXEC mode:
RP/0/RSP0/CPU0:router# show vpdn history failure | file tftp: vrf vrf1 |
RP/0/RSP0/CPU0:router# show vpdn client location 0/0/CPU0
RP/0/RSP0/CPU0:router# show vpdn tunnel destination detail |
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
434
PPPoE LAC-Specific Commands
show vpdn

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model