Cisco ASR 9000 Series - Modification; This Command was Introduced

Command Default
No default behavior or values
Command Modes
Global Configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writetunnel
Examples
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2tp-class c1
RP/0/RSP0/CPU0:router(config)# l2tp-class c1 congestion-control
Related Commands
DescriptionCommand
Configures l2tp tunnel.tunnel, on page 422
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
413
PPPoE LAC-Specific Commands
l2tp-class