Cisco ASR 9000 Series Command Reference

Task ID
OperationTask ID
readlpts
read, writebasic-services
Examples
The sample output for the show lpts punt excessive-flow-trap ip command is:
RP/0/RSP0/CPU0:router# show lpts punt excessive-flow-trap ip
Interface: Bundle-Ether1.100
Intf Handle: 0x08000320 Location: 0/6/CPU0
Protocol: IPv4/v6 Punt Reason: Raw-default
Penalty Rate: 10 pps Penalty Timeout: 15 mins
Time Remaining: 14 mins 31 secs
This table describes the significant fields shown in the display.
Table 14: show lpts punt excessive-flow-trap interface Field Descriptions
DescriptionField
The interface handler for the Bundle Ether interface.Intf Handle
The location of the interface.location
Specifies if it uses the IPv4 or IPv6 protocol.protocol
The reason to punt the excessive flow trap.punt reason
The penalty policing rate for a protocol in pps.penalty-rate
The penalty timeout value for a protocol in minutes.penalty-timeout
Related Commands
DescriptionCommand
Enables the Excessive Punt Flow Trap feature.lpts punt excessive-flow-trap, on page 252
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
270
Excessive Punt Flow Trap Commands
show lpts punt excessive-flow-trap protocol

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model