EasyManuals Logo

Cisco ASR 9000 Series Command Reference

Cisco ASR 9000 Series
590 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #328 background imageLoading...
Page #328 background image
Table 18: show ipv4 interface Command Field Descriptions
DescriptionField
If the interface hardware is usable, the interface is
marked Up. For an interface to be usable, both the
interface hardware and line protocol must be up.
Loopback0 is Up
If the interface can provide two-way communication,
the line protocol is marked Up. For an interface to
be usable, both the interface hardware and line
protocol must be up.
line protocol is Up
IPv4 Internet address and subnet mask of the
interface.
Internet address
Displays a secondary address, if one has been set.Secondary address
Displays the IPv4 MTU
1
value set on the interface.MTU
Indicates the multicast groups this interface belongs
to.
Multicast reserved groups joined
Indicates whether directed broadcast forwarding is
enabled or disabled.
Directed broadcast forwarding
Indicates whether the interface has an outgoing access
list set.
Outgoing access list
Indicates whether the interface has an incoming access
list set.
Inbound access list
Indicates whether proxy ARP
2
is enabled or disabled
on an interface.
Proxy ARP
Specifies whether ICMPv4
3
redirects are sent on this
interface.
ICMP redirects
Specifies whether unreachable messages are sent on
this interface.
ICMP unreachables
Indicates an IPv4 address has not been configured on
the interface.
Internet protocol processing disabled
1
MTU = maximum transmission unit
2
ARP = Address Resolution Protocoladdress resolution protocol
3
ICMPv4 = Internet Control Message Protocol internet control message protocol version 4
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
314
IPv4 and IPv6 Commands
show ipv4 interface (BNG)

Table of Contents

Other manuals for Cisco ASR 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9000 Series and is the answer not in the manual?

Cisco ASR 9000 Series Specifications

General IconGeneral
SeriesASR 9000
CategoryNetwork Router
Modular DesignYes
RedundancyYes (Hardware and Software)
Operating SystemCisco IOS XR
Interfaces/Ports10G, 40G, 100G, 400G Ethernet
Expansion SlotsVaries by model
Routing ProtocolBGP, OSPF, IS-IS, EIGRP
ManagementCLI, SNMP, NETCONF
Power SupplyRedundant
Port DensityVaries by model
Power Supply OptionsAC, DC
MemoryVaries by model
StorageVaries by model
DimensionsVaries by model
WeightVaries by model

Related product manuals