Cisco ASR 9000 Series Command Reference

ipsubscriber interface
To enable interface based static session in BNG, use the ipsubscriber interface command in the interface
configuration mode. To remove the static session, use the no form of this command.
ipsubscriber interface
no ipsubscriber interface
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
Interface configuration
Command History
ModificationRelease
This command was introduced.Release 5.1.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writenetwork
Examples
This example shows how to enable interface based static session in BNG:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# interface bundle-ether 1.1
RP/0/RSP0/CPU0:router(config-subif)# ipsubscriber interface
Related Commands
DescriptionCommand
Displays the subscriber management feature attribute
database information.
show subscriber manager sadb, on page 547
Shows the access interface information for IP subscriber.show ipsubscriber access-interface, on page 286
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
278
IPoE Commands
ipsubscriber interface

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model