Cisco ASR 9000 Series Command Reference

show igmp vrf (BNG)
To show the igmp vrf specific information, use the show igmp vrf command in the EXEC mode.
show igmp vrf vrf_name{groups| interface| nsf| ranges| ssm| summary| traffic| unicast-qos-adjusted}
Syntax Description
Shows the vrf information for igmp unicast qos shaper.vrf
Specifies the vrf name.
vrf_name
Shows the igmp group membership information.groups
Shows igmp interface information.interface
Shows igmp nsf status.nsf
Shows igmp group-map ranges.ranges
Shows ssm related information.ssm
Shows igmp summary information.summary
Show igmp traffic counters.traffic
Shows igmp unicast qos shaper.unicast-qos-adjusted
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readmulticast
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
349
Multicast Commands
show igmp vrf (BNG)

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model