show subscriber redundancy summary
To display the global status of BNG geo redundancy feature, use the show subscriber redundancy summary
command in the EXEC mode mode.
show subscriber redundancy summary [group| interface]
Syntax Description
Displays the subscriber redundancy summary of all configured SRGs.group
Displays the subscriber redundancy summary of all access sub-interfaces
configured under SRGs.
interface
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 5.2.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The details listed under this output of this command include, the IPv4 and IPv6 addresses from the
source-interface that is used for peering by this router, and the snapshot of the active subscriber redundancy
groups, interfaces and their roles.
The details listed under show subscriber redundancy summary group output also include the attributes or
settings of the SRGs in operation and their roles. The output also indicates the RP or LC where the control
plane for the SRG is being hosted for troubleshooting purposes.
The details listed under show subscriber redundancy summary interface output also include the mapping
group, ID and role of the SRGs.
Task ID
OperationTask ID
readnetwork
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
561
Subscriber Commands
show subscriber redundancy summary
To Next Page
Loading...
Need help?
General
