Cisco ASR 9000 Series Command Reference

Examples
This is a sample output of the show subscriber redundancy summary command:
RP/0/RSP0/CPU0:router#show subscriber redundancy summary
Subscriber Redundancy Summary
Status : Enabled Process State: Active
Preferred-Role: None
Slave-Mode : <<not-configured>> Hold Time : 0
Source Interface: GigabitEthernet0/1/0/1
VRF Name : default
IPv4 Address: 1.1.1.1
IPv6 Address: 11::1
Group Statistics:
Count : 10 Disabled : 0
Master : 5 Slave : 5
Interface Statistics:
Count : 12
Master : 6 Slave : 6
This is a sample output of the show subscriber redundancy summary group command:
RP/0/RSP0/CPU0:router#show subscriber redundancy summary group
Subscriber Redundancy Group Summary
Options: E - Enabled, D - Disabled
M - Preferred Master, S - Preferred Slave
H - Hot Mode, W - Warm Mode
T - Object Tracking Enabled
-------------------------------------------------------------------------
ID | Role | Virtual MAC Addr | Peer Address | I/F Count | Options | Node
-------------------------------------------------------------------------
210 Master 0001.0002.00D2 11::2 2 EM-T 0/RSP0/CPU0
211 Master 0001.0002.00D3 11::2 1 EM-T 0/RSP0/CPU0
212 Master 0001.0002.00D4 11::2 1 EM-T 0/RSP0/CPU0
213 Master 0001.0002.00D5 11::2 1 EM-T 0/RSP0/CPU0
214 Master 0001.0002.00D6 11::2 1 EM-T 0/RSP0/CPU0
410 Slave 0001.0002.019A 1.1.1.2 2 EM-T 0/RSP0/CPU0
411 Slave 0001.0002.019B 1.1.1.2 1 EM-T 0/RSP0/CPU0
412 Slave 0001.0002.019C 1.1.1.2 1 EM-T 0/RSP0/CPU0
413 Slave 0001.0002.019D 1.1.1.2 1 EM-T 0/RSP0/CPU0
414 Slave 0001.0002.019E 1.1.1.2 1 EM-T 0/RSP0/CPU0
This is a sample output of the show subscriber redundancy interface command:
RP/0/RSP0/CPU0:router#show subscriber redundancy interface
Subscriber Redundancy Interface Summary
Status: E - Exists, F - Forward Reference
-----------------------------------------------------------
Interface Name | Status | Group ID | Map ID | Role
-----------------------------------------------------------
Bundle-Ether1.1 E 210 210 Master
Bundle-Ether1.10 E 210 210 Master
Bundle-Ether1.11 E 211 211 Master
Bundle-Ether1.12 E 212 212 Master
Bundle-Ether1.13 E 213 213 Master
Bundle-Ether1.14 E 214 214 Master
Bundle-Ether3.1 E 410 410 Slave
Bundle-Ether3.10 E 410 410 Slave
Bundle-Ether3.11 E 411 411 Slave
Bundle-Ether3.12 E 412 412 Slave
Bundle-Ether3.13 E 413 413 Slave
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
562
Subscriber Commands
show subscriber redundancy summary

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model