Cisco ASR 9000 Series Command Reference

show l2tpv2 redundancy
To display the L2TP redundancy related information, use the show l2tpv2 redundancy command in the
EXEC mode.
show l2tpv2 redundancy
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.3.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readtunnel
Examples
This is the sample output of the show l2tpv2 redundancy command in the EXEC mode:
RP/0/RSP0/CPU0:router# show l2tpv2 redundancy
L2TP Tunnels: 0/0/0/0 (total/enabled/syncing/synced)
L2TP Sessions: 0/0/0 (total/enabled/synced)
L2TP HA Timestamps:
APP VPDN:
Configured: TRUE
Enabled: TRUE
Time Configured: Oct 12 14:00:25
Time Unconfigured: Oct 12 14:00:25
Time Enabled: Oct 12 14:00:35
Time Disabled:
Time Ready: Oct 12 14:00:35
Time Not-Ready:
L2TP Switchover Resync Statistics:
Poisoned sessions: 0
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
430
PPPoE LAC-Specific Commands
show l2tpv2 redundancy

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model