Cisco ASR 9000 Series Command Reference

IPoE Commands
This module describes the Cisco IOS XR software commands used to configure the IPoE commands for
Broadband Network Gateway (BNG) on the Cisco ASR 9000 Series Router. For details regarding the related
configurations, refer to the Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway
Configuration Guide.
•
initiator dhcp, page 272
•
initiator unclassified-ip, page 274
•
initiator unclassified-source, page 276
•
ipsubscriber interface, page 278
•
ipsubscriber l2-connected, page 280
•
ipsubscriber routed, page 282
•
ipsubscriber session-limit, page 284
•
show ipsubscriber access-interface, page 286
•
show ipsubscriber interface, page 289
•
show ipsubscriber summary, page 293
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
271

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model