Cisco ASR 9000 Series Command Reference

DescriptionField
Specifies the prototype, for instance, DHCP,
DHCPv6, PKTv6.
Proto
Specifies the IP address of the subscriber interface.Subscriber IP
Specifies the MAC address for each interface type.MAC Address
Specifies the sub label type for each interface.Sublabel
Specifies the default VRF type.VRF
Specifies the various states of the access interface,
for example, up, down, deleted, and unknown state.
State
Related Commands
DescriptionCommand
Displays the subscriber management session
information.
ipsubscriber l2-connected, on page 280
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
292
IPoE Commands
show ipsubscriber interface

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model