Name: Cisco ASR 9000 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

show pppoe summary

To show the summary information for the PPPoE sessions, use the show pppoe summary command in the

EXEC mode mode.

show pppoe summary {per-access-interface| total}{ location| node}

Syntax Description

Summarizes PPPoE sessions running on each access-interface.per-access-interface

Shows the overall summary information of access-interfaces and sessions.total

Shows PPPoE status for all sessions at a location.location

Specifies the fully qualified location specification.

node

Command Default

None

Command Modes

EXEC mode

Command History

ModificationRelease

This command was introduced.Release 4.2.0

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task

IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA

administrator for assistance.

Task ID

OperationTask ID

readppp

Examples

This is the sample output of the show pppoe summary command:

RP/0/RSP0/CPU0:router# show pppoe summary per-access-interfaces location 0/1/cpu0

COMPLETE: Complete PPPoE Sessions

INCOMPLETE: PPPoE sessions being brought up or torn down

Interface BBA-Group READY TOTAL COMPLETE INCOMPLETE

-------------------------------------------------------------------------------

Fa0/1/0/0 blue Y 20 18 2

Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release

5.2.x

473

PPPoE Commands

show pppoe summary

Cisco ASR 9000 Series Command Reference

Other manuals for Cisco ASR 9000 Series