Cisco ASR 9000 Series Command Reference

redundancy (BNG)
To enable VPDN redundancy and to enter the VPDN redundancy configuration mode, use the redundancy
command in VPDN configuration mode. To disable VPDN redundancy, use the no form of this command.
redundancy
no redundancy
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
VPDN configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.3.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writetunnel
Examples
This is an example of enabling the vpdn redundancy and entering the vpdn redundancy configuration submode:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# vpdn
RP/0/RSP0/CPU0:router(config-vpdn)# redundancy
RP/0/RSP0/CPU0:router(config-vpdn-redundancy)#
Related Commands
DescriptionCommand
Configures VPDN and enters the VPDN
sub-configuration mode.
vpdn, on page 424
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
417
PPPoE LAC-Specific Commands
redundancy (BNG)

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model