aaa radius attribute
To configure a format e encode string for particular interface or NAS-Port type and to create an AAA radius
attribute format configuration, use the aaa radius attribute command in Global Configuration mode. To
disable this AAA Radius attribute, use the no form of this command.
aaa radius attribute {called-station-id {format format_name| type value}| calling-station-id {format
format_name| type value}| nas-port {format e format_name| type value}| nas-port-id {format e format_name|
type value}}
no aaa radius attribute {called-station-id {format format_name| type value}| calling-station-id {format
format_name| type value}| nas-port {format e format_name| type value}| nas-port-id {format e format_name|
type value}}
Syntax Description
Specifies the AAA nas-port attribute.called-station-id
Specifies the AAA nas-port attribute.calling-station-id
Specifies the AAA nas-port attribute.nas-port
Specifies the AAA nas-port-id attribute.nas-port-id
Specifies the AAA nas-port attribute format.format
Specifies the AAA format type.e
Specifies a 32 character string representing the format
to be used.
format_name
Specifies the AAA nas-port attribute format.type
Specifies the Nas-Port-Type value to apply format
string on. The nas port value ranges from 0-44.
value
Command Default
None
Command Modes
Global Configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
19
BNG AAA Commands
aaa radius attribute
To Next Page
Loading...
Need help?
General
