Cisco ASR 9000 Series Command Reference

match vrf
To match class based on VRF name, use the match vrf command in the DHCP IPv4 proxy profile class
configuration mode. To disable the match vrf, use the no form of the command.
match vrf vrf_name
no match vrf vrf_name
Syntax Description
Specifies the VRF name.
vrf_name
Command Default
None
Command Modes
DHCP IPv4 proxy profile class configuration
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writeip-services
Examples
This is an example of configuring the match vrf command
RP/0/RSP0/CPU0:router(config)# dhcp ipv4
RP/0/RSP0/CPU0:router(config-dhcpv4)# profile dhcp_profile proxy
RP/0/RSP0/CPU0:router(config-dhcpv4-proxy-profile)# class blue
RP/0/RSP0/CPU0:router(config-dhcpv4-proxy-profile-class)# match vrf vrf1
Related Commands
DescriptionCommand
Matches the proxy with the configured pattern.match option, on page 175
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
177
BNG DHCP Commands
match vrf

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model