show l2tpv2 redundancy mirroring
To display the L2TP related mirroring statistics, use the show l2tpv2 redundancy mirroring command in
the EXEC mode.
show l2tpv2 redundancy mirroring
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.3.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command displays mirrored data on the backup RP. If the data in the show command is not applicable
on the backup RP, then trivial output such as '0' or empty is displayed.
Task ID
OperationTask ID
readtunnel
Examples
This is the sample output of the show l2tpv2 redundancy mirroring command in the EXEC mode:
RP/0/RSP0/CPU0:router# show l2tpv2 redundancy mirroring
L2TPv2 Mirroring Statistics
Since Last CLear
Send/Receive/Drop Send/Receive/Drop
CCSync 0/ 0/ 0 0/ 0/ 0
CCProtoSync 0/ 0/ 0 0/ 0/ 0
CCUnsync 0/ 0/ 0 0/ 0/ 0
CCSyncAck 0/ 0/ 0 0/ 0/ 0
CCIAck 0/ 0/ 0 0/ 0/ 0
CCSessionSyncDone 0/ 0/ 0 0/ 0/ 0
SessionSync 0/ 0/ 0 0/ 0/ 0
AppStatus 0/ 1/ 0 0/ 1/ 0
AddCCSteadyState 0/ 1/ 0 0/ 1/ 0
DelCCSteadyState 0/ 0/ 0 0/ 0/ 0
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
432
PPPoE LAC-Specific Commands
show l2tpv2 redundancy mirroring
To Next Page
Loading...
Need help?
General
