Cisco ASR 9000 Series Command Reference

show dhcp ipv4 proxy statistics
To display statistics for a specific bridge domain, use the show dhcp ipv4 proxy statistics command in the
EXEC mode.
show dhcp ipv4 proxy statistics location |]
Syntax Description
Specifies the node information for dhcp ipv4 proxy.location
Displays the output modifiers.|
Command Default
Displays a table of DHCP proxy statistics.
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator for assistance.
Task ID
OperationsTask ID
readip-services
Examples
This is the sample output of the show dhcp ipv4 proxy statistics command:
RP/0/RSP0/CPU0:router# show dhcp ipv4 proxy statistics
The show dhcp ipv4 proxy statistics output is as follows:
Wed Jan 23 17:07:12.386 IST
VRF | RX | TX | DR
|
-------------------------------------------------------------------------------------------
default | 0 | 0 | 0 |
**nVSatellite | 0 | 0 | 0 |
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
203
BNG DHCP Commands
show dhcp ipv4 proxy statistics

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model