Cisco ASR 9000 Series Command Reference

show dhcp ipv6 proxy interface (BNG)
To display the proxy interface information for Dynamic Host Configuration Protocol (DHCP), use the show
dhcp ipv6 proxy interface command in EXEC mode.
show dhcp ipv6 proxy interface{type| interface-path-id} {location| location}
Syntax Description
Interface type. For more information, use the question mark (?) online help function.
type
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark ( ? )
online help function.
interface-path-id
Displays the node location by Interface.location
Displays the fully qualified location specification of an interface.
location
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.3.0
Usage Guidelines
No specific guidelines impact the use of this command.
Task ID
OperationTask ID
readip-services
Examples
This is a sample output from the show dhcp ipv6 proxy interface command:
RP/0/RSP0/CPU0:router# show dhcp ipv6 proxy interface
Tue Sep 4 19:14:54.056 UTC
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
207
BNG DHCP Commands
show dhcp ipv6 proxy interface (BNG)

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model